5.5kw ER25 CNC Water Cooled Spindle Motor

Product Description

Basic parameters of 5.5kw Water cooled Spindle:

• Size:125x315mm(Middle body diameter:125mmxLength:315mm)
• Material: 304 stainless steel jacket, water jacket is pressure cast aluminum tubes, high temperature copper coil
• Speed Ways: through the inverter output voltage and adjust the operating frequency can be achieved 0-24000 stepless
• Cooling: water cooling mode
• Power Interface:   Optional KC20 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
• Power:5.5KW
• Voltage:220v/380V
• Current:19A/11A
• Frequency:300/400Hz
• Speed:18000-24000rpm
• Runout Off:0.01mm
• Diameter(mm):125
• Bearing Type:4 pcs bearings
• Collet:ER25
• Clip knifediameter:1-20mm,3.175mm,6.35mm,12.7mm
• Water Cooling ER25 collet chunk
• Grease Lubrication

Main Application:

Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working.