1.5kw ER11 Air Cooled Spindle Motor

Product Description

Basic parameters:

• Size: 65 x 204mm (Body diameter:65mm; Length:204mm)
• Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
• Cooling: Air cooling
• Power Interface: Optional H17-4 pins waterproof air plug. The air plug were connected to inverter U, V, W 4 connected inverter ground. (Pay attention our spindle 4 connecting to GND, promised personal safety)
• Power: 1.5kw (1HP=0.735kw)
• Voltage: 220vAC (If you need 110v/380v spindle, 
• Current: 6A
• Frequency: 0-400Hz
• Speed: 0-24000rpma
• Runout Off: 0.01mm
• Bearing Type: 2X7002C P4 DT and 2X7002C P4 DT
• Full sealed angular contact bearings
• Collet: ER11
• Clip Knife diameter: 7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mm
• Air Cooling ER11 collet chunk
• Grease Lubrication

Main Application:

Engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc non-metal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.